148
3-3. Adjusting the seats
The rear seat will move to the upright posi-
tion.
■ Operation of the rear seats from the
front seats
In the following situations, the rear seats
cannot be operated from the front seats.
● When the weight of an occupant, heavy
object, etc. is detected on a rear seat
Once weight is detected on the seat, the
seat will be judged as occupied until a rear
door is opened then closed or the power
switch is turned off and the doors are
locked.
● When the rear seat belt is fastened.
The rear seat relaxation system utilizes
pneumatic chambers, and applies
pressure to the occupant’s body at dif-
ferent modes and intensities.
To display the rear seat relaxation sys-
tem screen, display the home screen
on the Rear Multi Operation Panel
(P.483) and then select “Relax-
ation”.
Touch to select the desired rear
seat.
Touch to select the desired mode.
When a button is touched, operation will
begin.
Touch to adjust the intensity.
The intensity can be adjusted in 5 steps.
Touch to stop the operation.
If a seat is not occupied, do not operate the
rear seat relaxation system for that seat.
■ Relaxation system
● Operating conditions
• The power switch is in ON.
• The temperature in the cabin is not
extremely high.
• The weight of an occupant is detected on
the rear seat or the rear seat belt is fas-
tened.
Once weight is detected on the seat, the
seat will be judged as occupied until a rear
door is opened then closed or the power
switch is turned off and the doors are
locked.
● Automatic stop function
• The operation will be canceled automati-
cally after approximately 15 minutes.
■ When returning the rear seats to the
neutral position
To avoid injuring the rear passengers,
wait until they have gotten out of the
vehicle before operating the switch.
Rear seat relaxation system
A
B
C
D
To Next Page
Loading...
