173
3-6. Favorite settings
3
Before driving
■ Recording procedure
1 Check that the shift position is in P.
2 Turn the power switch to ON.
3 Adjust the driver’s seat, steering
wheel, outside rear view mirrors
and head-up display (if equipped)
to the desired positions.
4 While pressing the “SET” button, or
within 3 seconds after the “SET”
button is pressed, press button “1”,
“2” or “3” until the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
will be overwritten.
■ Recall procedure
1 Check that the shift position is in P.
2 Turn the power switch to ON.
3 Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
■ To stop the position recall operation
part-way through
Perform any of the following:
● Press the “SET” button.
● Press button “1”, “2” or “3”.
● Operate any of the seat adjustment
switches (only cancels seat position
recall).
● Operate the tilt and telescopic steering
control switch (only cancels steering
wheel position recall).
■ Jam protection function
If a person or object interferes while the
seat is moving automatically, the operation
will stop.
■ Using the Intelligent Assistant system (if
equipped)
The following operation can be performed
using the Intelligent Assistant system.
● Recording a driving position
● Recalling a driving position (it can be per-
formed only when the shift position is in
P)
For details regarding the Intelligent Assis-
tant system, refer to “MULTIMEDIA
OWNER’S MANUAL”.
■ Seat positions that can be memorized
(P.132)
The adjusted positions other than the posi-
tion adjusted by lumbar support switch can
be recorded.
■ While the power easy access system
is operating and the steering wheel
and seat is moving
Be careful not to get body parts or lug-
gage caught. Failure to do so may cause
an injury or damage to the luggage.
Recording/recalling a driving
position into memory button
To Next Page
Loading...
