177
3-6. Favorite settings
3
Before driving
2 Display the home screen on the
Rear Multi Operation Panel
(P.483) and then select “Seat”.
3 Select “Left” or “Right”.
4 Press and hold “1” or “2”.
When the seat has moved to the registered
position, operation will stop.
When the operating conditions are not
met, the buttons will be grayed out.
An individual can be identified using
the following authentication devices.
Electronic key/Digital key
*
An individual is identified when the smart
access system with push-button start
detects their electronic key/digital key.
(P.106, 127)
Face authentication system
*
An individual is identified at the open-
ing/closing of the door when face informa-
tion registered using the driver monitor
camera is identified. (P.247)
Individual identification by face authentica-
My Settings
By identifying an individual through
a device, such as an electronic key,
the driving position and vehicle set-
tings recorded for that driver can
be recalled when the vehicle is
entered.
By assigning an authentication
device to a driver in advance, the
driver can enter the vehicle with
their preferred settings.
Settings for 3 drivers can be stored
in My Settings.
For details on how to assign/delete
authentication devices, set driver
names, perform initialization,
change drivers manually, or delete
a driver, refer to “MULTIMEDIA
OWNER’S MANUAL”.
Types of assigned authentica-
tion devices
To Next Page
Loading...
