220
4-3. Operating the lights and wipers
4-3.Op erating the lights and wipers
Operating the switch turns on
the lights as follows:
For the U.S.A.
For Canada
1 The side marker, parking, tail,
license plate, instrument panel
lights, and daytime running lights
(P.220) turn on.
2 The headlights and all lights
listed above (except daytime run-
ning lights) turn on.
3 The headlights, daytime run-
ning lights (P.220) and all lights
listed above turn on and off auto-
matically.
4 (U.S.A.) Off
■ AUTO mode can be used when
The power switch is in ON.
■ Daytime running light system
● The daytime running lights illuminate the
parking lights and illuminate brighter than
the parking lights.
● To make your vehicle more visible to
other drivers during daytime driving, the
daytime running lights turn on automati-
cally when all of the following conditions
are met. (The daytime running lights are
not designed for use at night.)
• The hybrid system is operating
• The parking brake is released
• The headlight switch is in the or
(when the surroundings are bright) posi-
tion
The daytime running lights remain on after
they illuminate due to the conditions above,
even if the parking brake is set again.
● For the U.S.A.: Daytime running lights
can be turned off by operating the head-
light switch to position.
● Compared to turning on the headlights,
the daytime running light system offers
greater durability and consumes less
electricity, so it can help improve fuel
economy.
■ Headlight control sensor
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the wind-
shield. Doing so interferes with the sensor
detecting the level of ambient light and may
cause the automatic headlight system to
malfunction.
Headlight switch
The headlights can be operated
manually or automatically.
Turning on the headlights
A
B
To Next Page
Loading...
