271
4-5. Using the driving support systems
4
Driving
function may not operate.
The LDA system can be
enabled/disabled through a cus-
tomize setting. (P.677)
The settings of the LDA can be
changed on the customize settings.
(P.677)
The operating state of the lane departure alert function and steering assist opera-
tion of the lane departure prevention function are indicated.
Except for Puerto Rico
Changing LDA settings
■ Situations in which the system may
not operate properly
In the following situations, the system
may not operate properly and the vehi-
cle may depart from its lane. Do not
overly rely on these functions. The driver
is solely responsible for paying attention
to their surroundings and operating the
steering wheel as necessary to ensure
safety.
● When the boundary between the
asphalt and grass, soil, etc., or struc-
tures, such as a curb, guardrail, etc. is
not clear or straight
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the lane may not be
detected: P.245
● Situations in which the sensors may not
operate properly: P.244
● Situations in which some or all of the
functions of the system cannot oper-
ate: P.245
● When it is necessary to disable the sys-
tem: P.239
Displays and system operation
Indicator Lane display Steering icon Condition
Not illuminated Not illuminated Not illuminated System disabled
White Gray
Not illuminated
Lane lines are not
detected by the sys-
tem
To Next Page
Loading...
