332
4-5. Using the driving support systems
the multi-information display.
If the system switches to OFF (dis-
abled) and the PKSB (Parking Support
Brake) is stopped, the PKSB (Parking
Support Brake) will not be re-enabled
until ON (enabled) is selected again
from the customize setting (P.677).
(It remains off even if the power switch
is turned to ON again after the power
switch has been turned off.)
■ When the four-wheel drive control
switch is in L4
● The Parking Support Brake function
automatically turns off.
■ When towing a trailer
● When the 7-pin connector is connected,
the function automatically turns off.
● When the shift position is in R, the intui-
tive parking assist OFF indicator
(P.78) turns on and a message is dis-
played in the multi-information display.
● If a camera malfunction occurs while the
trailer is connected, there may be cases
where the notification message that indi-
cates intuitive parking assist, RCD, or
PKSB is OFF may not be displayed.
If the hybrid system output restriction con-
trol or brake control operates, a buzzer
will sound and a message that indicates
limited acceleration or prompts the driver
to brake will be displayed on the multime-
dia display and multi-information display,
to alert the driver.
Depending on the situation, output restric-
tion control operates to either limit accel-
eration or restrict output as much as
possible.
Hybrid system output restriction
control is operating (acceleration
restriction)
Acceleration greater than a certain
amount is restricted by the system.
Multimedia display: No warning displayed
Message example on the multi-informa-
tion display: “Object Detected Accelera-
tion Reduced”
Driving assist information indicator: Not
illuminated
Buzzer: Does not sound
Hybrid system output restriction
control is operating (output
restricted as much as possible)
The system has determined that stronger-
than-normal brake operation is necessary.
Message example on the multimedia dis-
play: “BRAKE!”
Message example on the multi-informa-
tion display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Brake control is operating
The system determined that emergency
braking is necessary.
Message example on the multimedia dis-
play: “BRAKE!”
Message example on the multi-informa-
tion display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Vehicle stopped by system opera-
tion
The vehicle has been stopped by brake
control operation.
Display and buzzer for hybrid
system output restriction control
and brake control
To Next Page
Loading...
