334
4-5. Using the driving support systems
of collision with detected object is
extremely high)
■ If the Parking Support Brake has oper-
ated
If the vehicle is stopped due to operation of
the Parking Support Brake, the Parking
Support Brake will be disabled and the driv-
ing assist information indicator will illumi-
nate. In addition, even when the PKSB
(Parking Support Brake) operates, the
brake control is canceled after approxi-
mately 2 seconds to start off. Furthermore,
the brake control also can be canceled by
depressing the brake pedal. Depressing the
accelerator pedal again after that allows the
vehicle to start off.
■ Re-enabling the Parking Support Brake
To re-enable the Parking Support Brake
when it is disabled due to operation of the
PKSB (Parking Support Brake), either
enable the system again, or turn the power
switch off and then back to ON.
Additionally, if any of the following condi-
tions are met, the system will be re-enabled
automatically and the driving assist informa-
tion indicator will turn off (P.81):
● The P shift position is selected
● Drive with no operation targets in the
traveling direction of the vehicle
● Change the traveling direction of the
vehicle
■ Buzzer
Regardless of whether the intuitive parking
assist is enabled or not (P.314), if the
PKSB (Parking Support Brake) system is
enabled (P.331), the buzzer will sound to
notify the driver of the approximate dis-
tance to the object when the brake control
and the hybrid system output restriction
control are operated.
*
: If equipped
This function will operate in situations
such as the following if an object is
detected in the traveling direction of
the vehicle.
Parking Support Brake
function (static objects front
and rear of the vehicle/static
objects around the vehicle
*
)
If the sensors detect a static object,
such as a wall, in the traveling direc-
tion of the vehicle and the system
determines that a collision may
occur due to the vehicle suddenly
moving forward due to an acciden-
tal accelerator pedal operation, the
vehicle moving the unintended
direction due to the wrong shift
position being selected, or while
parking or traveling at low speeds,
the system will operate to lessen
the impact with the detected static
object and reduce the resulting
damage.
Examples of function operation
(static objects front and rear of
the vehicle)
To Next Page
Loading...
