340
4-5. Using the driving support systems
The system operates when an
approaching pedestrian is detected
behind the vehicle while backing up,
and when the brake pedal is not
depressed or is depressed late.
Displays a message to prompt the
driver to brake when a pedestrian is
detected in the detection area behind
the vehicle.
Pedestrian detection icon
Example: “BRAKE!”
■ The Parking Support Brake function
(pedestrians rear of the vehicle) will
operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.78) and all of the following con-
ditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is 9 mph (15 km/h) or
less.
• The shift position is in R.
• When a pedestrian is to the rear of the
vehicle
• The PKSB (Parking Support Brake)
determines that a stronger-than-normal-
brake operation is necessary to avoid a
collision.
Parking Support Brake
function (pedestrians rear of
the vehicle)
If the rear camera sensor detects a
pedestrian behind the vehicle while
backing up and the system deter-
mines that the possibility of collid-
ing with the detected pedestrian is
high, a buzzer will sound. If the sys-
tem determines that the possibility
of colliding with the detected
pedestrian is extremely high, the
brakes will be applied automati-
cally to help reduce the impact of
the collision.
Examples of system operation
Screen display of pedestrians
rear of the vehicle
■ If the Parking Support Brake function
(pedestrians rear of the vehicle)
operates unnecessarily
Depress the brake pedal immediately
after the Parking Support Brake function
(pedestrians rear of the vehicle) oper-
ates. (Operation of the function is can-
celed by depressing the brake pedal.)
■ Correct use of the Parking Support
Brake function (pedestrians rear of
the vehicle)
P.327
A
B
To Next Page
Loading...
