343
4-5. Using the driving support systems
4
Driving
● Always pay attention to the vehicle’s
surroundings while the system is oper-
ating and depress the brake pedal as
necessary to slow or stop the vehicle.
If Remote control function is in opera-
tion, stop operating the dedicated
smartphone app of Remote control
function (hereafter, dedicated app)
and stop the vehicle.
● When parking, make sure that the
vehicle can be parked in the target
parking space before beginning oper-
ation.
● Depending on the condition of the
road surface or the vehicle, the dis-
tance between the vehicle and a park-
ing space, etc., it may not be possible
to detect a parking space or the sys-
tem may not be able to provide assis-
tance to the point the vehicle is fully
parked.
● This system will guide the vehicle to
appropriate positions for changing the
direction of travel, however, if you feel
that the vehicle is approaching too
close to an adjacent parked vehicle at
any time, depress the brake pedal and
change the shift position. However, if
this is performed, the number of times
the vehicle changes direction may
increase, and the vehicle may be
parked at an angle.
● As certain objects or materials, such as
the following, may not be detected,
make sure to check the safety of the
area around your vehicle and depress
the brake pedal to stop the vehicle if it
may collide with an object.
If Remote control function is in opera-
tion, stop operating the dedicated app
and stop the vehicle.
• Thin objects (wires, fences, ropes,
poles, etc.) or objects that appear like
thin from a certain angle of approach
(signs, bicycles, etc.)
• Materials that absorb sound waves
(cotton, snow, etc.)
• Sharp-edged objects (block walls/col-
umns, wall corners, etc.)
• Objects in lower places (curb
stones/blocks, stairs, parking blocks,
etc.)
• Tall objects with upper sections that
protrude outward (beams, etc.)
• Objects which are not perpendicular
to the ground
• Objects to which the vehicle is
approaching diagonally
● Even if there is an object in the target
parking space, it may not be detected
and assistance may be performed.
● If it is likely that your vehicle will collide
with a nearby vehicle, object, or per-
son, or go over the top of a parking
block, depress the brake pedal to stop
the vehicle and press the Advanced
Park main switch to disable the system.
If Remote control function is in opera-
tion, stop operating the dedicated app
and stop the vehicle.
● Never use only the multimedia display
to view the area behind the vehicle.
The image displayed may differ than
the actual situation. Using only the
screen when backing up may lead to
an accident, such as a collision with
another vehicle. When backing up,
make sure to look directly or use the
mirrors to check the safety of the area
around your vehicle, especially behind
the vehicle.
● When the ambient temperature is
extremely low, the screen may appear
dark or the displayed image may
become unclear. Also, as moving
objects may appear distorted or may
not be able to be seen on the screen,
make sure to directly check the safety
of the area around your vehicle.
To Next Page
Loading...
