33
1-1. For safe use
1
For safety and security
used to hold a child restraint system (CRS)
firmly. To free the belt again, fully retract the
belt and then pull the belt out once more.
1 Push the seat belt shoulder anchor
down while pressing the release
button .
2 Push the seat belt shoulder anchor
up while pressing the release but-
ton .
Move the height adjuster up and down as
needed until you hear a click.
If the seat belt comes into contact with
the neck, change the position where to
pass the seat belt.
Make sure that all occupants are wear-
ing their seat belts before driving the
vehicle. (P.31)
1 Detach the button .
2 Change the position where to pass
the seat belt.
After changing the position, attach the but-
ton .
If the seat belt obstructs the view
depending on the angle of the seat
back, the view can be improved by
using the seat belt rerouter.
1 Pull the seat belt rerouter from the
seatback pocket.
Adjusting the seat belt shoulder
anchor height (front seats)
■ Adjustable shoulder anchor
Always make sure the shoulder belt is
positioned across the center of your
shoulder. The belt should be kept away
from your neck, but not falling off your
shoulder. Failure to do so could reduce
the amount of protection in an accident
and cause death or serious injuries in the
event of a sudden stop, sudden swerve
or accident.
Seat belt guide (if equipped)
A
Seat belt rerouter (if equipped)
A
To Next Page
Loading...
