425
4-5. Using the driving support systems
4
Driving
the non-displayed areas of the image.
● Variations in the brightness of the image
may appear for every camera due to
lighting conditions.
● The displayed image may be misaligned
due to inclination of the vehicle body or
change in vehicle height caused by the
number of passengers, vehicle load, and
quantity of fuel.
● If the doors are not completely closed,
the image and the guide lines may not be
displayed correctly.
● The positional relationship of the road
surface and objects with the vehicle icon
displayed on see-through view, moving
view, panoramic view (including zoomed
display), side clearance view, and corner-
ing view may differ to the actual positions.
● Light from a back-lit license plate may
appear on the screen.
● Images indicated by in the figure are
a composite, and hence some areas may
be difficult to see.
■ Wide front view
Area displayed on the screen
Objects not displayed on the
screen
Areas close to both corners of the bum-
pers will not appear on the screen.
■ Display range
● The area covered by the camera is lim-
ited. Objects that are close to either cor-
ner of the bumper or under the bumper
cannot be displayed on the screen.
● The depth perception of the image dis-
played on the screen differs to the actual
distance.
● The wide front view camera uses a spe-
cial lens, so the depth perception of the
image displayed on the screen differs to
the actual distance.
A
B
To Next Page
Loading...
