428
4-5. Using the driving support systems
the camera with a large amount of
water and then wipe the camera lens
clean with a soft, damp cloth.
Dirt on the rear camera lens can be
cleaned by operating the dedicated
camera cleaning washer. (P.232)
When cleaning the camera, it may
be difficult to see the image due to
the washer fluid. When backing up,
be sure to visually check all around
the vehicle both directly and using
the mirrors before proceeding.
If washer fluid remains on the cam-
era lens surface after cleaning, the
image may be difficult to see at night
due to the height or inclination of
the headlights of the vehicle behind.
Some dirts may not be removed
completely after cleaning. In this
case, rinse the camera lens with a
large quantity of water and then
wipe it clean with a soft cloth damp-
ened with water.
Washer fluid is sprayed onto the
camera lens surface. Therefore, the
ice, snow, etc. adhering around the
camera cannot be removed.
■ How to use the cameras
● The Multi-terrain Monitor may stop
functioning correctly. Take note of the
following items:
• Do not hit or apply a forceful impact on
the camera. Doing so may change the
position and mounting angle of the
camera.
• The camera is designed to be water-
proof. Do not detach, disassemble, or
modify it.
• When washing the camera lens, splash
the camera with a large amount of
water and then wipe the camera lens
clean with a soft, damp cloth. Rubbing
the camera lens forcibly may scratch
the camera lens and you may no lon-
ger be able to see images clearly.
• The camera cover is made of resin. Do
not allow an organic solvent, car wax,
window cleaner, or glass coating to
adhere to the camera. If this happens,
wipe it off immediately.
• Do not pour hot water on the vehicle in
cold weather or apply other rapid
changes of temperature.
• If you wash the vehicle with a high
pressure car washer, do not point the
hose directly at the camera or camera
area. Applying strong water pressure
may result in the camera malfunction-
ing.
● If the camera is hit, it may cause a cam-
era malfunction. If this happens, have
the vehicle inspected by your Lexus
dealer as soon as possible.
Cleaning the rear camera with
washer fluid
● If there is a sufficient amount of washer
fluid but it does not spray out, check
that the washer nozzle is not blocked.
● When the washer fluid reservoir is
empty, do not operate the switch con-
tinually as the washer fluid pump may
overheat.
● When a nozzle becomes blocked,
contact your Lexus dealer. Do not try
to clear it with a pin or other object.
The nozzle would be damaged.
To Next Page
Loading...
