459
4-5. Using the driving support systems
4
Driving
MTS switch
MODE SELECT switch
Multi-information display
Selected mode is displayed.
1 Press the MTS switch.
The indicator on the switch will turn on.
2 Select the driving modes on the
multi-information display while
turning the MODE SELECT switch
left and right.
Depending on the positions of the four-
wheel drive control switch, a mode can be
selected from among the following modes.
Four-wheel drive control switch is in
L4
If the brake control has activated, the slip
indicator light will flash.
Four-wheel drive control switch is in
H4
■ Precaution for use
The Multi-terrain Select is intended for
use during off-road driving. Do not use
the system at any other time.
System components
Switching modes
A
B
C
A
Mode Road Conditions
AUTO
Suitable for the road
conditions
SAND Suitable for sandy roads
MUD
Suitable for muddy
roads
ROCK
Suitable for rocky ter-
rain
Mode Road Conditions
AUTO
Suitable for the road
conditions
DIRT Suitable for dirt roads
SAND Suitable for sandy roads
To Next Page
Loading...
