50
1-2. Child safety
■ When installing a child restraint
system to a front passenger seat
For the safety of a child, install child
restraint systems to a rear seats. When
installing child restraint system to a
front passenger seat is unavoidable,
adjust the seat as follows and install the
child restraint system.
Adjust the seatback angle to the
most upright position.
If there is a gap between the child seat and
the seatback, adjust the seatback angle
until good contact is achieved.
Move the front seat fully rearward. If
the passenger seat height can be
adjusted, move it to the upper most
position.
Installation method Page
Seat belt attachment P.52
Child restraint LATCH
anchors attachment
P.56
Anchor brackets (for top
tether strap) attachment
P.58
When using a child restraint sys-
tem
To Next Page
Loading...
