635
7-2. Steps to take in an emergency
7
When trouble arises
3 Take out the tool box.
4-passenger models
1 Lift the deck board.
2 Take out the tool box.
1 Assembling the jack handle.
Remove the jack handle extension bar and
wheel nut wrench from the tool box and
assemble by following these steps.
2 Remove the cover.
To prevent damage, cover the tip of the
screwdriver with a rag.
3 Insert the jack handle into the low-
ering screw.
1 Lower
2 Raise
Place a rag under the jack handle to pro-
tect the rear bumper.
Taking out the spare tire
To Next Page
Loading...
