647
7-2. Steps to take in an emergency
7
When trouble arises
Push the tab in and lift the lid off.
4 Open the exclusive jump starting
terminal cover.
5 Connect a positive jumper cable clamp to on your vehicle and connect the
clamp on the other end of the positive cable to on the second vehicle. Then,
connect a negative cable clamp to on the second vehicle and connect the
clamp at the other end of the negative cable to .
Use jumper cables that can reach the specified terminals and connecting point.
Exclusive jump starting terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Metallic point shown in the illustration
6 Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery of your
vehicle.
A
B
D
A
B
C
D
To Next Page
Loading...
