75
1-5. Theft deterrent system
1
For safety and security
The intrusion sensor and tilt sensor will
revert to on each time the power switch is
turned to ON.
■ Canceling and automatic re-enabling of
the intrusion sensor and tilt sensor
● The alarm will still be set even when the
intrusion sensor and tilt sensor are can-
celed.
● After the intrusion sensor and tilt sensor
are canceled, pressing the power switch
or unlocking the doors using the entry
function or wireless remote control will
re-enable the intrusion sensor and tilt
sensor.
● The intrusion sensor and tilt sensor will
automatically be re-enabled when the
alarm system is reactivated.
■ Intrusion sensor considerations
The sensor may trigger the alarm in the fol-
lowing situations:
● People or pets are in the vehicle.
● A window or the moon roof is open.
In this case, the sensor may detect the fol-
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
● Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.
● The vehicle is parked in a place where
extreme vibrations or noises occur, such
as in a parking garage.
● Ice or snow is removed from the vehicle,
causing the vehicle to receive repeated
impacts or vibrations.
● The vehicle is inside an automatic or
high-pressure car wash.
● The vehicle experiences impacts, such as
To Next Page
Loading...
