89
2-1. Instrument cluster
2
Vehicle status information and indicators
■ Display items
Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■ Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
■ Pop-up display
Distance until the next engine oil
change will be displayed when a warn-
ing message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
The brightness of the instrument panel
lights can be adjusted.
■ To prevent damage to the engine and
its components
● Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (“H”). In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.652)
■ Voltmeter
When the voltmeter indicates 19 V or
higher, or 9 V or lower while the engine
is running, there may be a battery or
charging system malfunction. Have the
vehicle inspected at your Lexus dealer.
■ Engine oil pressure gauge
When the value of the engine oil pres-
sure gauge drops while the engine is run-
ning, stop the vehicle in a safe place
immediately and check the amount of
engine oil. (P.568)
When the oil pressure drops even
though the engine oil amount has not
decreased, or if the oil pressure does not
increase when engine oil is added, con-
tact your Lexus dealer, as there may be a
problem with the lubrication system.
Using the “ODO TRIP” switch
Changing the instrument panel
light brightness
To Next Page
Loading...
