93
2-1. Instrument cluster
2
Vehicle status information and indicators
■ Minimum
Speedometer
■ Head-up display will operate when
The power switch is in ON.
■ When using the head-up display
The head-up display may seem dark or hard
to see when viewed through sunglasses,
especially polarized sunglasses. Adjust the
brightness of the head-up display or
remove your sunglasses.
■ Street name display
Only street names which are included in the
map data will be displayed.
■ Changing settings of the head-up
display
1 Select on the multimedia dis-
play.
2 Select “Vehicle customize”.
3 Select “Head up display”.
The following settings can be changed.
Enabling/disabling the head-up dis-
play
Select to enabling/disabling the head-up
display.
Head-up display type
Select to change head-up display type.
(P.92)
■ When using the head-up display
● Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
● Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
A
■ Head-up display projector
● Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
● Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
● Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
Using the head-up display