94
2-1. Instrument cluster
Brightness and vertical position of
the head-up display
Select to adjust the brightness or vertical
position of the head-up display.
Display angle
Select to adjust the angle of the head-up
display.
■ Enabling/disabling of the head-up dis-
play
If the head-up display is disabled, it will
remain disabled when the power switch is
turned off then back to ON.
■ Display brightness
In addition to the brightness setting, the
brightness of the display will change auto-
matically according to the ambient bright-
ness.
■ Head-up display automatic adjustment
If the display setting is recorded into mem-
ory, the head-up display will be automati-
cally adjusted. (P.172)
■ When the 12-volt battery is discon-
nected
The customize settings of the head-up dis-
play will be reset.
Displays the engine speed in revolu-
tions per minute.
■ Head-up display is displayed when
The power switch is in ON.
■ Tachometer is displayed when
Tachometer is displayed when all of the fol-
lowing conditions are met:
• When LTA (Lane Tracing Assist), LDA
(Lane Departure Alert) and dynamic
radar cruise control is turned off.
• Full mode (P.92) is selected as head-
up display type.
■ Caution for changing settings of the
head-up display
As the hybrid system needs to be operat-
ing while changing the settings of the
head-up display, ensure that the vehicle
is parked in a place with adequate venti-
lation. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
■ When changing the settings of the
head-up display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while changing the settings of the
head-up display.
Tachometer display area