Lexus NX 200 - PKSA (Parking Support Alert)277; PKSA (Parking Support Alert)

277
4
LEXUSNX300/NX200OwnersManualGeneralM78540en
4-5. Using the driving support systems
Driving
*
: If equipped
■ Lexus parking assist-sensor (if
equipped)
Ultrasonic sensors are used to detect
static objects in the detection area
when driving at a low speed or backing
up. (P.278)
■ Adjusting the buzzer volume
The buzzer volume can be adjusted on
the multi-information display.
Use the meter control switches to
change settings. (P.90)
1 Press or to select .
2 Press or to select “PKSA”
and then press .
3 Press or to select and
then press .
Each time the switch is pressed, the volume
level change between 1, 2, and 3.
■ Muting buzzer
P.279
PKSA (Parking Support
Alert)
*
The Parking Support Alert system
consists of the following functions
that operate when driving at a low
speed or backing up, such as when
parking. When the system deter-
mines that a collision with a
detected object, such as a wall is
high, a warning operates to urge
the driver to take evasive action.
PKSA (Parking Support Alert)
system
Setting the buzzer volume