EasyManua.ls Logo

Lexus NX 200 - Page 282

Lexus NX 200
514 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
281
4
LEXUSNX300/NX200OwnersManualGeneralM78540en
4-5. Using the driving support systems
Driving
Thin posts or objects lower than the sen-
sor may not be detected when
approached, even if they have been
detected once.
It might be difficult to hear beeps due to
the volume of audio system or air flow
noise of the air conditioning system.
Customization
Some functions can be customized.
(Customizable features: P.482)
Detection range of the sensors
Approximately 100 cm (3.3 ft.)
Approximately 150 cm (4.9 ft.)
Approximately 65 cm (1.9 ft.)
WARNING
When using the Lexus parking assist-
sensor
Observe the following precautions.
Failure to do so may result in the vehicle
being unable to be driven safely and pos-
sibly cause an accident.
Do not use the sensor at speeds in
excess of 10 km/h (6 mph).
The sensors’ detection areas and reac-
tion times are limited. When moving
forward or reversing, check the areas
surrounding the vehicle (especially the
sides of the vehicle) for safety, and
drive slowly, using the brake to control
the vehicle’s speed.
Do not install accessories within the
sensors’ detection areas.
NOTICE
When using Lexus parking assist-sen-
sor
In the following situations, the system
may not function correctly due to a sen-
sor malfunction, etc. Have the vehicle
checked by your Lexus dealer.
The Lexus parking assist-sensor oper-
ation display flashes, and a buzzer
sounds when no obstacles are
detected.
If the area around a sensor collides
with something, or is subjected to
strong impact.
If the bumper collides with something.
If the display shows continuously with-
out beeping, except when the buzzer
mute switch has been turned on.
If a display error occurs, first check the
sensor.
If the error occurs even if there is no
ice, snow or mud on the sensor, it is
likely that the sensor is malfunctioning.
Notes when washing the vehicle
Do not apply intensive bursts of water or
steam to the sensor area.
Doing so may result in the sensor mal-
functioning.
Sensor detection display, obsta-
cle distance
A
B
C

Table of Contents

Related product manuals