Lexus NX 200 - Page 292

291
4
LEXUSNX300/NX200OwnersManualGeneralM78540en
4-5. Using the driving support systems
Driving
■ Engine output restriction control is
operating (control to restrict out-
put as much as possible)
■ Brake control is operating
■ The vehicle is stopped by system
operation
*
: If the accelerator pedal is not depressed,
“Press Brake Pedal” will be displayed.
■ System operation
When the vehicle is stopped by system
operation, the Parking Support Brake func-
tion (for static objects) stops and the PKSB
OFF indicator illuminates.
■ System recovery
When the Parking Support Brake function
(for static objects) is stopped by system
operation and you would like to resume
operation, either turn the Parking Support
Brake function (for static objects) ON again
(P.284), or turn the engine switch off and
then back on. Furthermore, when the vehi-
cle moves with a static object no longer in
the traveling direction of the vehicle, or
when the traveling direction of the vehicle
changes (such as when switching from
moving forward to backing up, and vice
versa), system operation automatically
resumes.
■ Clearance sonar buzzer
Regardless of whether the clearance sonar
is on or off, if the Parking Support Brake
PKSB OFF
Indicator
Not illuminated
Buzzer —
Situation
A stronger than normal
brake operation is neces-
sary
Multi-informa-
tion dis-
play/Head-up
display
“BRAKE!”
Naviga-
tion/multime-
dia system
screen
PKSB OFF
Indicator
Not illuminated
Buzzer Short beep
Situation
Emergency braking is
necessary
Multi-informa-
tion dis-
play/Head-up
display
“BRAKE!”
Naviga-
tion/multime-
dia system
screen
PKSB OFF
Indicator
Not illuminated
Buzzer Short beep
Situation
The vehicle is stopped
after brake control oper-
ation
Multi-informa-
tion dis-
play/Head-up
display
“Switch to Brake”
*
Naviga-
tion/multime-
dia system
screen
“Press Brake Pedal”
PKSB OFF
Indicator
Illuminated
Buzzer Short beep