Lexus NX 200 - Page 303

302
LEXUSNX300/NX200OwnersManualGeneralM78540en
4-5. Using the driving support systems
 Panoramic view monitor
A vehicle is approaching from the left
or right at the rear of the vehicle
■ The Rear Cross Traffic Alert function detection areas
The areas that vehicles can be detected in are outlined below.
To give the driver a more consistent time to
react, the buzzer can alert for faster vehi-
cles from farther away.
Example:
■ The Rear Cross Traffic Alert function is
operational when
● The BSM main switch is set to on.
● The shift lever is in R.
● Vehicle speed is less than approximately
8 km/h (5 mph).
● Approaching vehicle speed is between
approximately 8 km/h (5 mph) and 28
km/h (18 mph).
■ Conditions under which the Rear Cross
Traffic Alert function will not detect a
vehicle
The Rear Cross Traffic Alert function is not
designed to detect the following types of
vehicles and/or objects.
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Vehicles approaching from directly
behind
*
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
Approach-
ing vehicle
Speed
Approxi-
mate
alert distance
Fast
28 km/h (18
mph)
20 m (65 ft.)
Slow
8 km/h (5
mph)
5.5 m (18 ft.)
A