Connecting to a network using Wi-Fi
®
The multimedia s
ystem can be connected to the Internet by connecting to a
Wi-Fi
®
network.
This function is not available in some countries or areas.
INFORMATION
● The r
eception level is displayed at the top of the screen.
● It cannot be used if the Wi-Fi
®
Hotspot is on. Also, it cannot be used if Apple CarPlay
or Android Auto is used with a wireless connection.
● Some smartphone models may require establishing a connection each time.
● If networks are detected while the Wi-Fi
®
function is on, automatic connection will
prioritize connecting to the network with the most recent connection.
Related Links
Changing Wi-Fi
®
settings(P
. 80)
Connecting to Wi-Fi
®
using a smartphone
Refer to the following operation example to establish a Wi-Fi
®
connection using
a smartphone that supports Wi-Fi
®
tethering. For details on setting up tethering,
refer to documents such as the instruction manual for the smartphone. Some
smartphone models may require establishing a connection each time.
1 Touch [ ] from the main menu.
2 T
ouch submenu [Wi-Fi] > [Wi-Fi] in this order.
3 Set [Wi-Fi] in the main area to on.
● A message may be displayed depend-
ing on the multimedia system settings.
Perform the operation according to
the screen guidance.
● Turning on [Wi-Fi] will display nearby
networks that are available.
4 Select the name of the network that matches the name being broadcasted by
the smartphone.
● Network name may display as duplicate when more than one MAC address shares
the same network.
3-2. Connecting to a Wi-Fi
®
netw
ork
106
To Next Page
Loading...
