In-call operations
Perform operations from the in-call screen
During a call, v
arious operations can be performed from the in-call screen.
[
] : Mute the transmitted sound so
that the other party cannot hear the spo-
ken voice. The button turns blue during
mute.
To cancel, touch the button again.
You will be able to hear what the
other party is saying.
[ ] : Display
s the keypad screen. The call screen will be displayed as small
while the keypad screen is displayed.
[
] : Hang up during a call.
[ ] : Display the cont
act list in the submenu to make a call to another person.
● You can make a call to another person by touching the phone number during a
call to make a call.
[
] : Allo
ws a call to be switched between the cellular phone and the
multimedia system. During a cellular phone call, the button changes to blue.
[
] : Cancel the pending call. Only displayed on hold.
[ ] : R
educe the call screen.
[
] : Display the call scr
een in the main area.
INFORMATION
● D
epending on the state of the multimedia system, the call screen may be reduced or
not displayed.
● Switching calls may not be possible depending on the cellular phone model.
● Calls cannot be switched from the hands-free system to the cellular phone while
driving. Switching calls may not be possible depending on the cellular phone model.
● If the cellular phone you are talking on is connected to the multimedia system as
a hands-free phone, the busy screen is displayed. Depending on the cellular phone
model, the call can be either a cellular phone or a multimedia system.
● If you operate the engine switch <power switch> during a call with a hands-free phone,
the call may be disconnected or continued on the cellular phone depending on the
cellular phone model. If you want to continue on your cellular phone, you may need to
operate your cellular phone.
6-5. In-call operations
205
6
Hands-free calls
To Next Page
Loading...
