NOTICE
rear camera, and side cameras. As there is a limit to the displayable range and content,
mak
e sure you fully understand the features of the panoramic view monitor before you
use it.
● The four corners of the see-through view, moving view, panoramic view, side clearance
view, and cornering view have a video composition processing region centered on
borders of the cameras, and image clarity may decline. However this is not a fault.
● Depending on lighting conditions near each camera, bright and dark patches may
appear on the see-through view, moving view, panoramic view, side clearance view,
and cornering view.
● See-through view, moving view, panoramic view, side clearance view, and cornering
view does not extend higher than the installation position and image capture range of
each camera.
● There are blind spots around the vehicle and as such there are regions not displayed
on the panoramic view monitor.
● Three-dimensional objects displayed in wide front view, rear view, wide rear view or
side view may not be displayed in see-through view, moving view, panoramic view, side
clearance view, and cornering view.
● People and other three-dimensional obstacles may appear differently when displayed
on the panoramic view monitor. (These differences include cases in which displayed
objects appear to have fallen over, disappear near image processing regions, appear
from video composition processing areas, or when the actual distance to an object
differs from the displayed position.)
● When the back door, which is equipped with the rear camera, or front doors, which
are equipped with side mirrors that have the built-in side cameras, are open, images
will not be displayed properly on the panoramic view monitor.
● The vehicle icon displayed in see-through view, moving view, panoramic view, side
clearance view, and cornering view is a computer generated image, so the color,
shape and size will differ from the actual vehicle. Therefore, nearby three-dimensional
objects may appear to be touching the vehicle, and actual distances to three-dimen-
sional objects may differ from those displayed.
● The camera may not function correctly and the image may be displayed on the screen
in the following manner:
• When the shift position is in "R", part or all of the screen may appear black
• When the shift position is in "R", the screen may not change to the camera image
• The guide lines are not displayed on the camera image, and attention symbols and
caution notices are displayed
8-2. Panoramic view monitor
274
To Next Page
Loading...
