Registering a Bluetooth
®
de
vice from the multimedia system
A cellular phone or portable device must be registered in order to use hands-free
calling or Bluetooth
®
audio. Once registration is complete, Bluetooth
®
will auto-
matically be connected each time the multimedia system is started.
When Apple CarPlay / Android Auto is connected via USB, the device will be
registered automatically.
When no Bluetooth
®
devices are connected, the registration screen can be
displayed by pressing and holding the [
] steering wheel s
witch.
INFORMATION
● A cellular phone can be r
egistered as both a hands-free phone and Bluetooth
®
audio
device.
● Although up to five Bluetooth
®
devices can be registered, up to two devices can
be used as hands-free phones. (In order to connect two hands-free phones, driver
identification is required.)
● Refer to the Bluetooth
®
device’s instruction manual for information on how to operate
the Bluetooth
®
device.
● Registration will need to be repeated once for each Bluetooth
®
device if multiple
Bluetooth
®
devices will be used.
● A PIN code is a Verification code used when registering a Bluetooth
®
device to the
multimedia system.
● Dialing may be locked out after connecting, depending on the cellular phone settings.
Cancel the auto lock function on the cellular phone before use.
● If another device is registered while connected to a cellular phone or portable
device, the connection to the portable device or cellular phone playing audio will be
disconnected.
● For safety reasons, devices cannot be registered while driving.
● If the registration of the Bluetooth
®
device does not work, restart the Bluetooth
®
device.
1 T
ouch [
] from the main menu.
2 T
ouch [Bluetooth & Devices].
3 Touch [Manage devices].
3-1. Using the Bluetooth
®
function
94
To Next Page
Loading...
