121
2. DESTINATION SEARCH
NX300h/NX200t_Navi_OM78105U_(U)
15.06.25 12:26
NAVIGATION SYSTEM
3
3. STARTING ROUTE GUIDANCE
1 Select “OK” to start guidance.
When the destination is set, the entire
route map from the current position to
the destination is displayed.
STARTING ROUTE
GUIDANCE
No. Information/Function
Select the desired route from 3 pos-
sible routes. (P.122)
Select to change the route.
(P.123)
Select to display a list of the turns re-
quired to reach the destination.
(P.123)
Current position
Destination point
Type of route and its distance
Distance of the entire route
Select to start guidance.
If “OK” is selected and held until a
beep sounds, demo mode will start.
Press the “HOME” button on the
Remote Touch to end demo mode.
● Be sure to obey traffic regulations and
keep road conditions in mind while driv-
ing. If a traffic sign on the road has been
changed, the route guidance may not
indicate such changed information.
● The route for returning may not be the
same as that for going.
● The route guidance to the destination
may not be the shortest route or a route
without traffic congestion.
● Route guidance may not be available if
there is no road data for the specified
location.
● When setting the destination on a map
with a scale more than 0.5 mile (800 m),
the map scale changes to 0.5 mile (800
m) automatically. If this occurs, set the
destination again.
● If a destination that is not located on a
road is set, the vehicle will be guided to
the point on a road nearest to the destina-
tion. The road nearest to the selected
point is set as the destination.
To Next Page
Loading...
