303
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
NX300h/NX200t_Navi_OM78105U_(U)
15.06.25 12:26
PHONE
8
When is selected
3 Check that the “Call” screen is dis-
played.
When the desired contact is selected
3 Select the desired number.
4 Check that the “Call” screen is dis-
played.
1 Display the phone top screen.
(P.301)
2 Select the “Contacts” tab and select the
desired contact.
3 Select the desired number.
4 Check that the “Call” screen is dis-
played.
●When making a call to the same number
continuously, only the most recent call is
listed in call history.
●When a phone number registered in the
contact list is received, the name is dis-
played.
●Number-withheld calls are also memo-
rized in the system.
●International phone calls may not be
made depending on the type of cellular
phone you have.
●The list should group together consecu-
tive entries with the same phone number
and same call type. For example, two calls
from John’s mobile would be displayed as
follows: John (2)
●By pressing the
switch on the steer-
ing wheel, a call to the latest history item
can be made.
BY CONTACTS LIST
Calls can be made by using contact data
which is transferred from a registered
cellular phone. (P.304)
Up to 2500 contacts (maximum of 4
phone numbers and e-mail addresses
per contact) can be registered in the
contact list.
To Next Page
Loading...
