152
3-2. Opening, closing and locking the doors
NX200t/200_OM_Europe_OM78156E
■ When the vehicle is not driven for extended periods
● Vehicles with entry function: To prevent theft of the vehicle, do not leave the electronic
key within 2 m (6 ft.) of the vehicle.
● The smart entry & start system can be deactivated in advance. (P. 658)
■ To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get the elec-
tronic key too close to the vehicle when operating the system from the outside of the
vehicle.
Depending on the position and holding condition of the electronic key, the key may not
be detected correctly and the system may not operate properly. (The alarm may go off
accidentally, or the door lock prevention may not operate.)
■ If the smart entry & start system does not operate properly
● Locking and unlocking the doors: Use the mechanical key. (P. 625)
● Starting the engine: P. 627
■ Customization
Settings (e.g. smart entry & start system) can be changed.
(Customizable features: P. 658)
■ If the smart entry & start system has been deactivated in a customized setting
● Locking and unlocking the doors:
Use the wireless remote control or mechanical key. (P. 130, 625)
● Starting the engine and changing engine switch modes: P. 627
● Stopping the engine: P. 222
To Next Page
Loading...
