107
2. Instrument cluster
2
Instrument cluster
NX200t/200_OM_Europe_OM78156E
Items displayed can be switched by pressing or of the meter control
switches to select and pressing or .
■ Current fuel consumption*
1
Displays the current rate of fuel consumption
■ Average fuel consumption (after reset*
2
/after start/after refuel)*
1
Displays the average fuel consumption since the function was reset, the
engine was started, and the vehicle was refueled, respectively
Use the displayed average fuel consumption as a reference.
■ Average vehicle speed (after reset*
2
/after start)*
1
Displays the average vehicle speed since the function was reset and the
engine was started, respectively
■ Elapsed time (after reset*
2
/after start)*
1
Displays the elapsed time since the function was reset and the engine was
started, respectively
■ Distance (driving range/after start)*
1
Displays the estimated maximum distance that can be driven with the quantity
of fuel remaining and the distance driven after the engine was started respec-
tively.
• This distance is computed based on your average fuel consumption. As a result,
the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not be
updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning
the engine switch off, the display may not be updated.
■ Eco Driving Indicator Zone Display
P. 109
Drive information
To Next Page
Loading...
