Lexus NX200t 2017 - Canceling & Automatic Re-Enabling of Intrusion Sensor and Tilt Sensor; Intrusion Sensor Detection Considerations

92
1-2. Theft deterrent system
NX200t/200_OM_Europe_OM78156E
■ Canceling and automatic re-enabling of the intrusion sensor and tilt sensor
● The alarm will still be set even when the intrusion sensor and tilt sensor are canceled.
● After the intrusion sensor and tilt sensor are canceled, pressing the engine switch or
unlocking the doors using the entry function (if equipped) or wireless remote control
will re-enable the intrusion sensor and tilt sensor.
● The intrusion sensor and tilt sensor will automatically be re-enabled when the alarm
system is reactivated.
■ Intrusion sensor detection considerations
The sensor may trigger the alarm in the following situations:
● People or pets are in the vehicle.
● A window or the moon roof (if equipped) is
open.
In this case, the sensor may detect the follow-
ing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other vehi-
cles
• The movement of people outside the vehi-
cle
● Unstable items, such as dangling accessories
or clothes hanging on the coat hooks, are in
the vehicle.
● The vehicle is parked in a place where extreme
vibrations or noises occur, such as in a parking
garage.
nasicoelec.ir