▶ Vehicles with a head-up display
1 Increase set vehicle speed
2 Decrease set vehicle speed
The set vehicle speed will increase or decrease as follows:
Fine adjustment: By or 1 mph (1.6 km/h) or 1 km/h (0.6 mph) each time the
switch is pressed
Large adjustment: Increases continuously while the switch is pressed and held
■ Increasing the set vehicle speed using the accelerator pedal
1 Depress the accelerator pedal to accelerate the vehicle to the desired vehicle
speed.
2 Vehicles without a head-up display: Press the [+RES] switch. Vehicles with a
head-up display: Press the [ + ]switch
Canceling/resuming control
1 Press the cancel switch or driving assist
switch to cancel control.
Control will also be canceled if the brake pedal is
depressed.
▶
Vehicles without a head-up
display
▶ Vehicles with a head-up dis-
play
6-2. Using the safe driving support functions
457
6
Driving support system
To Next Page
Loading...
