Lexus NX300h - Page 120

120
3-2. Opening, closing and locking the doors
LEXUS NX300h Owners Manu-
al_USA_OM78212U
1 Press or of the meter con-
trol switches and select .
2 Press or of the meter con-
trol switches, select the “Vehicle
Settings” and then press .
3 Press or of the meter con-
trol switches (→P.85), select
and then press .
4 Press or of the meter con-
trol switches (→P.85), and then
select “System Settings”.
5 ON and OFF will be switched over
with presses of on the meter
control switches.
When OFF is selected and the operations
of the power back door is made to stop
from the “settings display” of multi-infor-
mation display, unless it is set to ON, the
operation of the power back door will not
return. (No return in the power switch
operation)
ON (enable) and OFF (disable) can be
switched between by the “settings dis-
play” (→P.85) of the multi-information
display.
1 Press or of the meter con-
trol switches and select .
2 Press or of the meter con-
trol switches, select the “Vehicle
Settings” and then press .
3 Press or of the meter con-
trol switches (→P.85), select
, and then press .
4 Press or of the meter con-
trol switches (→P.85), and then
select “Kick Sensor”.
5 ON and OFF will be switched over
with presses of on the meter
control switches.
When OFF is selected and the operations
of the kick sensor is made to stop from the
“settings display” of multi-information dis-
play, unless it is set to ON, the operation of
the kick sensor will not return. (No return
in the power switch operation)
The open position of the power back
Canceling the kick sensor (vehi-
cles with power back door and
kick sensor)
Adjusting the open position of
the back door (vehicles with
power back door)