Lexus NX300h - Page 188

188
4-3. Operating the lights and wipers
LEXUS NX300h Owners Manu-
al_USA_OM78212U
■ Switching to low beam
Pull the lever to original position.
The Automatic High Beam indicator will
turn off.
Push the lever away from you to activate
the Automatic High Beam system again.
■ Switching to high beam
Press the Automatic High Beam
switch.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Press the switch to activate the Automatic
High Beam system again.
NOTICE
● Do not install a parking tag or any
other accessories near or around the
camera sensor.
● Do not overload the vehicle.
● Do not modify the vehicle.
● Do not replace windshield with non-
genuine windshield.
Contact your Lexus dealer.
Changing to manual control
mode