Lexus NX300h - Page 427

427
8-2. Customization
LEXUS NX300h Owners Manu-
al_USA_OM78212U
8
Vehicle specifications
■ Power back door
*1
(→P.110)
*1
: If equipped
*2
: Configured by operating the switch of the lower back door. (→P.120)
*3
: While carrying the electronic key on your person, press the back door opener switch.
*4
: When the towing hitch is installed, the kick sensor does not work
■ Vehicle customization
● When the speed linked door locking function and shift position linked door locking func-
tion are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all the doors will be locked.
• If the vehicle is started with all the doors locked, the speed linked door locking function
would not operate.
• If the vehicle is started with any door unlocked, the speed linked door locking function will
operate.
● When the smart access system with push-button start is off, smart door unlocking cannot
be customized.
● When the doors remain closed after unlocking the doors and the automatic door lock
function is activated, the signals will be generated in accordance with the Operation sig-
nal (buzzer) and the Operation signal (emergency flashers) settings.
■ In the following situations, customize mode in which the settings can be changed
through the multi-information display will automatically be turned off.
● A warning message appears after the customize mode screen is displayed.
● The power switch is turned off.
Function Default setting
Customized set-
ting
 Set at the desired Position
(height)
*2
Back Door Automatic Open
and Stop Position
Initial settings
Position
Stop at the
desired position
(height)
— — — O
 5 step configuration
Back Door Automatic Open
and Stop Position
5 1 to 5 O — — —
Back door opener switch
operations
When the back
door is locked
*3
When the back
door is unlocked
— — O —
Power back door operations On Off — O — —
Operation buzzer volume 3
1
— O — —
2
Kick Sensor
*1, 4
On Off — O — —
A
B
C
D