Lexus NX300h - Page 88

88
2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_OM78212U
warning.
 Sway sensitivity
Select to set the vehicle sway warning sen-
sitivity.
■ PCS (Pre-Collision System)
(→P.203)
Select to set up the following items.
 PCS on/off
Select to enable/disable the pre-collision
system.
 PCS sensitivity
Select to change the warning timing.
■ Intuitive parking assist sensor
(if equipped) (→P.227)
Select to set up the following items.
 Intuitive parking assist sensor
Select to enable/disable the intuitive park-
ing assist sensor.
 Volume
Select to set the volume of the buzzer
which sounds when the intuitive parking
assist sensor is operated.
■ PKSB (Parking Support
Brake System) (if equipped)
(→P.232)
 PKSB on/off
Select to enable/disable the parking sup-
port brake function (for static objects).
■ Clock (→P.288)
Select to switch between 12-hour dis-
play and 24-hour display.
■ Vehicle Settings
 PBD (Power Back Door)
(→P.110)
*1
Select to set up the following items.
•System settings
Select to enable/disable the power back
door system.
•Volume
Select to set the volume of the buzzer
which sounds when the power back door
system.
• Kick Sensor
*2
Select to enable/disable the kick sensor.
*1
: Vehicles with power back door
*2
: Vehicles with power back door and kick
sensor
 TPMS (Tire Pressure Warning Sys-
tem) (→P.338)
Select to initialize the tire pressure warning
system.
 Scheduled Maintenance (→P.319)
Select to initialize the scheduled mainte-
nance.
 Oil maintenance (→P.329)
Select to reset the engine oil maintenance
information (message indicating mainte-
nance is required and distance until the
next oil change) after engine oil mainte-
nance is performed.
■ Meter settings
 Language
Select to change the language on the dis-
play.
 Units
Select to change the unit of measure for
fuel consumption.
 EV Indicator (→P.62)
Select to set the EV indicator on/off.
 Switch settings (→P.85)