Shift position display and how to change the shift position
A
Shift lever
Operate the shift lever gently and securely in
the direction of the arrow on the shift position
indicator.
To shift to N , slide the shift lever in the direction
of the arrow and hold it.
Release the shift lever after each shifting opera-
tion to allow it to return to its regular position
(●).
Shifting to M is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N, D,
M or R to P, from D or M to R, or from R to D,
ensure that the brake pedal is being depressed
and the vehicle is stationary.
B
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
C
P position switch
Fully stop the vehicle and set the parking brake,
and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator shows P.
INFORMATION
■ Changing the shift position in each engine switch mode
● The shift position cannot be changed when the engine switch is in ACC or off.
● When the engine switch is in ON, the shift position can only be changed to N.
2-2. Driving procedures
165
2
Driving the vehicle
To Next Page
Loading...
