Operations when turning left or right or changing lanes
By operating the turn signal lever, the intent of the driver can be shown as follows.
INFORMATION
● The turn signal lights can be operated when the engine switch is in ON.
● If the indicator flashes faster than usual, check that a light bulb in the front or rear turn
signal lights has not burned out.
1 Move the lever to position 1.
The right turn signal lights will blink.
2 Move the lever to position 2 and release it.
The right hand signals will flash 3 times.
3 Move the lever to position 3 and release it.
The left hand signals will flash 3 times.
4 Move the lever to position 4.
The left turn signal lights will blink.
2-2. Driving procedures
171
2
Driving the vehicle
To Next Page
Loading...
