Reprogram the HomeLink
®
When the following procedure is performed, buttons which already have devices
registered to them can be overwritten:
1 Press and hold the desired HomeLink
®
button.
2 When the HomeLink® indicator starts flashing orange, release the Home-
Link
®
button.
3 Press and release the HomeLink
®
button you want to program and check that
the HomeLink
®
indicator light flashes orange.
It takes 20 seconds for the HomeLink
®
indicator to start flashing.
Erase the entire HomeLink
®
memory
When selling your vehicle, be sure to erase the registered codes from the Home-
Link
®
memory.
Press and hold the 2 outer HomeLink
®
buttons
for 10 seconds. Check that the HomeLink
®
indi-
cator light changes from continuously lit in or-
ange to rapidly flashing in green.
All codes registered to memory will be erased.
▶ Vehicles with auto anti-
glare inside rear view mirror
▶ Vehicles with Digital Rear-
view Mirror
2-3. Parking the vehicle
190
To Next Page
Loading...
