INFORMATION
■ Seat positions that can be memorized
The adjusted positions other than the position adjusted by lumbar support switch can
be recorded.
■ In order to correctly use the driving position memory function
If a seat position is already in the furthest possible position and the seat is operated in
the same direction, the registered position may be slightly different when it is recalled.
WARNING
Take care during seat adjustment so that the seat does not contact a rear passenger
or squeeze your body against the steering wheel.
Recalling a driving position (position memory function)
WARNING
Never use any part of your body to intentionally activate the jam protection function.
1 Check that the shift position is in P.
2 Turn the engine switch to ON.
3 Press one of the buttons for the driving po-
sition you want to recall until the buzzer
sounds.
INFORMATION
■ To stop the position recall operation part-way through
Perform any of the following:
● Press the “SET” button.
● Press button “1”, “2” or “3”.
● Operate any of the seat adjustment switches (only cancels seat position recall).
● Operate the tilt and telescopic steering control switch (only cancels steering
wheel position recall).
4-2. Adjusting the preferred driving position
252
To Next Page
Loading...
