The function guide for the touched switch will be displayed.
INFORMATION
■ If the steering wheel switches do not respond when touched
● It is easier to make the steering wheel switches respond by moving your thumb while
touching them.
● If the surface of a steering wheel switch is dirty, turn the engine switch off and then
clean the switches.
● By turning winter glove mode on, the sensitivity of the switch sensors can be increased.
Related Links
Customizable features(P. 703)
Switching the display of the multi-information display (vehicles without a
head-up display)
●
Press
or of the meter control switch.
Switching driving information (vehicles without a head-up display)
● Press the or meter control switch to select . Then press or .
Switching the display of the multi-information display (vehicles with a head-
up display)
INFORMATION
■ Switching with the steering wheel switches
If / is set as a favorite steering wheel switch function, the display can be
switched by pushing or .
1
Select on the center display.
2 Select [Vehicle customize].
3 Select [Meter].
4
Select
or of "Display switching".
The display changes each time the switch is selected.
Display of drive information
Driving related information is displayed on the following displays.
5-2. Functions of the displays
332
To Next Page
Loading...
