• If the temperature in the cabin is extremely high or low, the audio system screen
may not operate correctly.
RCD function
Center Display
A
Pedestrian detection icon
Displayed automatically when a pedestrian
is detected.
(Each time the engine switch is turned off
then changed to ON, the RCD function will
be enabled automatically.)
When a pedestrian is detected
If the rear camera detection function detects a pedestrian in the detection area, the
buzzer and pedestrian detection will operate as follows:
A
If a pedestrian is detected in area
Buzzer: Sounds repeatedly
Pedestrian detection icon: Blinks
B
If a pedestrian is detected in area
Buzzer (When the vehicle is stationary):
Sounds 3 times
Buzzer (When the vehicle is backing up,
when a pedestrian approaches the rear of
the vehicle): Sounds repeatedly
Pedestrian detection icon: Blinks
C
If the system determines that your vehicle
may collide with a pedestrian in area
Buzzer: Sounds repeatedly
Pedestrian detection icon: Blinks
Changing the RCD settings
Turning the RCD function ON/OFF
The RCD function can be enabled/disabled on the center display as follows:
6-2. Using the safe driving support functions
426
To Next Page
Loading...
