1 Confirm that the electronic key is being car-
ried.
When connecting the jumper (or booster) cables,
depending on the situation, the alarm may activate
and the doors may lock.
2 Open the hood.
3 Remove the positive (+) battery terminal cov-
er.
4 Connect a positive jumper cable clamp to on your vehicle and connect the
clamp on the other end of the positive cable to
on the second vehicle. Then,
connect a negative cable clamp to on the second vehicle and connect the
clamp at the other end of the negative cable to
▶ NX250
▶ NX350
9-5. If a door cannot be opened or locked
631
9
When trouble arises
To Next Page
Loading...
