■ Automatic locking retractor (ALR)
When a passenger's shoulder belt is completely extended and then retracted even
slightly, the belt is locked in that position and cannot be extended. This feature is used to
hold the child restraint system (CRS) firmly. To free the belt again, fully retract the belt and
then pull the belt out once more.
WARNING
● Do not damage the seat belts by allowing the belt, plate, or buckle to be jammed in the
door.
● Ensure that the belt and plate are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact your Lexus dealer.
Adjusting the height of the front seat belts
1 Push the seat belt shoulder anchor down
while pressing the release button .
2 Push the seat belt shoulder anchor up while
pressing the release button .
Move the height adjuster up and down as need-
ed until you hear a click.
WARNING
■ Adjustable shoulder anchor
Always make sure the shoulder belt is positioned across the center of your shoulder. The
belt should be kept away from your neck, but not falling off your shoulder. Failure to do so
could reduce the amount of protection in an accident and cause death or serious injuries
in the event of a sudden stop, sudden swerve or accident.
1-6. Obtaining the correct driving posture
139
1
Before driving
To Next Page
Loading...
