■ Operation of the power switch
● If the switch is not pressed shortly and firmly, the power switch mode may not
change or the hybrid system may not start.
● If attempting to restart the hybrid system immediately after turning the power
switch off, the hybrid system may not start in some cases. After turning the power
switch off, please wait a few seconds before restarting the hybrid system.
Related Links
Manual applying/releasing of the parking brake (manual mode)(P. 181)
Shift position display and how to change the shift position(P. 166)
Changing the power switch mode
Modes can be changed by pressing the power switch with brake pedal released.
(The mode changes each time the switch is pressed.)
1 OFF
The emergency flashers can be used.
2
ACC
*1
Some electrical components such as the
audio system can be used. "ACCESSORY"
will be displayed on the multi-information
display.
3 ON
All electrical components can be used.
"IGNITION ON" will be displayed on the
multi-information display.
INFORMATION
■ Auto power off function
● If the vehicle is left in ACC or ON (the hybrid system is not operating) for more than
20 minutes with the shift position in P, the power switch will automatically turn to OFF.
● If the 12-volt battery is low with the shift position is in P and the power switch is in ACC
or ON (the hybrid system is not operating). The power switch is automatically turn to
OFF.
*1 :
This can be enabled/disabled through a customize setting.
2-1. Starting and stopping the hybrid system
156
To Next Page
Loading...
