● The shift position cannot be changed from P to S directly.
■ The shift position cannot be changed when
In the following situations, a buzzer will sound to inform you that the shift position cannot
be changed. Use the appropriate operation to attempt to change the shift position again.
● When attempting to change the shift position from P with the brake pedal not
depressed
● When attempting to change the shift position from P with the accelerator pedal
depressed
● When attempting to change the shift position from N while stopped or driving at an
extremely low speed with the brake pedal not depressed
● When attempting to change the shift position from N while stopped or driving at an
extremely low speed with the accelerator pedal depressed
● When attempting to change the shift position from P or N to S
● When the P position switch is pressed while driving
When driving at an extremely low speed, the shift position may change to P.
■ The shift position automatically changes to N when
In the following situations, a buzzer will sound to inform you that the shift position
has been changed to N. Use the appropriate operation to attempt to change the shift
position again.
● When attempting to change the shift position to R while the vehicle is moving forward
When driving at a low speed, the shift position may change to R.
● When attempting to change the shift position to D while the vehicle is moving
backward
When driving at a low speed, the shift position may change to D.
● When attempting to change the shift position from R to S
■ If the N shift position is selected while driving
If the shift lever is moved to N while driving above a certain speed, the shift position will
change to N without holding the shift lever in the N position. In this situation, a buzzer will
sound and a message will be displayed on the multi-information display to inform you that
the shift position has been changed to N.
■ Automatic P position selection function
In the following situations, the shift position is automatically changed to P.
● When pressing the power switch with the vehicle stopped while the power switch is
in ON and the shift position is in a position other than P (after the shift position has
changed to P, the power switch will turn off )
*1
2-2. Driving procedures
168