perpendicular to the center of the parking space. Also, depending on the condition
of the parking space, etc., if it is necessary to change the direction of travel of the
vehicle, the shift position can be changed by assistance control.
Parking using the perpendicular parking (forward/reverse) function
1 Stop the vehicle at a position close and perpendicular to the center of the
target parking space.
▶ If there are parking space lines
A
Approximately 3.3 ft. (1 m)
*2
B
Approximately 8.2 ft. (2.5 m)
*2
C
Approximately 19.7 ft. (6 m) or more
*2
D
Approximately 18.0 ft. (5.5 m) or more
*2
The system can operate even if there is a parking space line on only one side of the
target parking space.
▶ If there are parking space lines
A
Approximately 3.3 ft. (1 m)
*3
B
Approximately 9.8 ft. (3 m) or more
*3
C
Approximately 19.7 ft. (6 m) or more
*3
D
Approximately 18.0 ft. (5.5 m) or more
*3
The system can operate even if there is a vehicle on only one side of the target parking
space.
2 Press the Advanced Park main switch and check that a possible parking space
is displayed on the center display.
*2 :
This is a reference measurement for detection of a parking space. Depending on the
surrounding environment, detection may not be possible.
*3 :
This is a reference measurement for detection of a parking space. Depending on the
surrounding environment, detection may not be possible.
6-2. Using the safe driving support functions
451
6
Driving support system
To Next Page
Loading...
