NOTICE
● Do not allow liquid or foreign matter to enter the air intake vent when the cover is
removed.
● Carefully handle the removed filter so that it will not be damaged.
If the filter is damaged, have it replaced with a new filter by your Lexus dealer.
● Make sure to reinstall the filter and cover to their original positions after cleaning.
● Do not install anything to the air intake vent other than the exclusive filter for this
vehicle or use the vehicle without the filter installed.
1 Remove the dust from the vent and filter with
a vacuum cleaner.
Make sure to only use a vacuum to suck out dust
and clogs. Attempting to blow out dust and clogs
using an airgun, etc. may push it into the air intake
vent.
If dust and clogs cannot be completely removed with the air intake vent cover
installed, remove the cover and clean the filter.
2 Turn the power switch off.
3 Using a phillips-head screwdriver, remove the
clip.
8-2. Cleaning and protecting the vehicle interior
542
To Next Page
Loading...
